Left-Angle Crawler Linear Module: Cantilever Torsional Rigidity | Yangning

Nov 12, 2026

Leave a message

 
Left-Angle Mount Crawler-Type Linear Modules
 

Torsional Rigidity in Cantilevered Pick-and-Place

Modified Gear-Driven Linear Guide Belt Drive Actuator FR
Crawler-Type Linear Modules
Belt Driven Stepper Motor Linear Actuator with Brake FL
Left-Angle Mount Design
Right Angle Direct Coupling Belt Linear Stage
Cantilever Pick-and-Place Axis
  1. Download 3D CAD (.STEP) models for crawler-type linear modules to run your dial table layout simulation before mechanical design freeze.
  2. Left-angle motor mounting relocates the servo drive laterally instead of axially, reducing overall installation width by 37% for multi-station cam index dial layouts. The crawler toothed-belt drive achieves multi-tooth meshing with zero transmission slippage, while wide-base linear guide extrusion suppresses pitch and yaw deflection under cantilever moment loads. This mechanical configuration maintains positional repeatability within ±0.01mm at cycle times below 0.75s for miniature relay component handling.
Parameter Crawler Belt Drive (Left-Angle Module) Standard Open Toothed Belt Ball Screw Drive
Positional Repeatability ±0.01 mm ±0.03 mm ±0.005 mm
Max Linear Speed 3.2 m/s 2.8 m/s 1.2 m/s
Allowable Pitch Moment 215 N·m/rad 120 N·m/rad 280 N·m/rad
Anti-Slippage Performance Zero slip (multi-tooth mesh) Risk of tooth jump under high acceleration No slip
Maintenance Interval 12,000 operating hours 8,000 operating hours 15,000 operating hours
Relative Capex Medium Low High

 

Pair this axis with our high-speed PPU pick-and-place manipulators for full relay material handling automation.

Send Inquiry