Product Introduction
Our CC-FPDM16C-01L FP distributed I/O controller is a programmable distributed power unit adopting CAN bus protocol. It realizes real-time and reliable data communication between nodes with distributed control design. Featuring modular structure, it simplifies wiring work and delivers stable performance for automatic mechanical parking systems.
Key Benefits
▶Space-saving & simplified wiring: No complicated wiring design, convenient connection, reduces engineering design and wiring working hours to save project time.
▶Modular & no-program design: Pre-configured and standardized module, no programming required to cut labor cost and shorten commissioning cycle.
▶Strong expandability: Supports up to 1024 control points to meet the expansion demand of large-scale mechanical parking systems.
Technical Specifications
|
Item |
Specifications |
|
Operating ambient temperature |
0℃ ~ +55℃ |
|
Storage temperature |
-40℃ ~ +70℃ |
|
Vibration & Shock resistance |
Withstand vibration and impact for X/Y/Z three axes |
|
Operating environment |
No corrosive gas and excessive dust |
|
Weight |
Approx.750g |
|
Input Specifications |
|
|
Insulation |
Optocoupler isolation |
|
Rated input voltage |
24V DC |
|
Response time |
≤0.6ms |
|
AC Input Power |
|
|
Rated voltage |
100V~240V AC, 50/60Hz |
|
DC Output Power |
|
|
Rated output voltage |
24V DC |
|
Rated output current |
0.21A |
|
Output Specifications |
|
|
Output form |
1A relay output, non-replaceable |
|
Rated resistive load |
5A 250V AC,5A 30V DC |
|
Service life |
Mechanical ≥10 million times; Electrical ≥120,000 times |
Why Choose This Machine
CC-FPDM16C-01L FP distributed I/O controller is tailor-made for mechanical parking equipment. It uses CAN bus distributed control to reduce complicated field wiring. The pre-standardized, no-programming module greatly shortens project delivery cycle. It supports up to 1024 points expansion, with wide temperature resistance and stable electrical performance, suitable for long-time continuous operation in automated parking systems.
Part of Your Smart Factory
CAN Bus Distributed I/O Module can be integrated into smart automated parking factory projects. Distributed node control realizes real-time data exchange among multiple equipment nodes, simplifies system expansion and later maintenance, helps you build stable, expandable intelligent mechanical parking control solutions.
Applications & Components
▶Standard two-layer lifting and traversing parking garage: Perfect for standard two-level auto parking equipment with CAN bus control.
▶Multi-story lifting and traversing parking system: Ideal for multi-layer mechanical parking lots to realize distributed node control.
▶System components: CAN bus slave power unit, matched with FP series control system for automated parking machinery.
FAQ
Q: What are the working and storage temperature limits?
A: The operating ambient temperature ranges from 0℃ to +55℃, and the storage temperature ranges from -40℃ to +70℃. It can adapt to the temperature changes of indoor parking equipment workshops.
Q: What is the main application scenario of this unit?
A: It is mainly applied to lifting and traversing mechanical parking garage systems, including standard two-layer and multi-layer stereo parking equipment, to realize distributed power and signal control.
Q: What is the weight of this distributed power unit?
A: Its weight is about 750g. The compact body is easy to install inside the control cabinet of parking equipment.
Hot Tags: cc-fpdm16c-01l fp distributed i/o controller, China cc-fpdm16c-01l fp distributed i/o controller manufacturers, factory, Panasonic CX 400 Ver 2 Compact Photoelectric Sensor, Panasonic FP XH Programmable Controller, Panasonic MADLN05SE Servo Drive, Panasonic MHMF012L1V2M Servo Motor, Panasonic MSMF012L1V2M Servo Motor, Panasonic MSMF152L1G6M Servo Motor
