Product Introduction
Our SW-200 series optical start switch is a light-operated activation sensor. It supports four switchable output modes and comes with a protective cover and M30 mounting structure. Finger shading triggers startup without force, easing operator fatigue. It uses 5-core rubber cable and passes CE certification.
Key Benefits
SW-200 series optical start switch
Technical Specifications
|
Item |
SW-211 / SW-212 |
|
Power Supply |
10V DC ~ 30V DC ±10%, pulse below P-P10% |
|
Current Consumption |
40mA max |
|
Output |
Semiconductor photo MOS output, max load current 100mA, external voltage ≤30V DC |
|
Output Mode |
Switchable: ON when light enters / ON when light blocked; with auto-recovery short-circuit protection |
|
Response Time |
≤100ms for detection, ≤50ms for non-detection |
|
Indicator |
Orange LED for output status; Green LED for power indication |
|
Protection Class |
IP65(IEC) |
|
Operating Temp |
-25℃ ~ +55℃; Storage: -30℃ ~ +70℃ |
|
Light Source |
Modulated infrared LED, wavelength 950nm |
|
Housing Material |
PC, protective cover PA66, base PBT |
|
Cable |
0.2mm² 5-core rubber cable, standard length 2m, extendable up to 100m |
|
Weight |
Approx. 200g (main body), 250g with package |
Why Choose This Machine
SW-200 series optical start switch replaces traditional mechanical start switches. It avoids long-time pressing, hand injury and operator fatigue. Its service life is far longer than mechanical switches, delivering higher value. It achieves high sensitivity and stable actuation accuracy, outperforming mechanical switches with low sensitivity and false triggering risks.
Part of Your Smart Factory
Optical Start Switch SW-200 Series is a reliable human-machine activation component for smart factory assembly lines. It brings simple installation, stable detection and safer operation, helping factories reduce operator fatigue and lower unexpected downtime caused by misoperation.
Applications & Components
▶Automotive parts processing industry: Used for safe one-touch startup of automotive component processing stations.
▶Electronic equipment manufacturing industry: Deployed on assembly lines for convenient and fatigue-free operation.
▶Mechanical processing industry: Applied to machine workstations to replace mechanical push switches.
▶Components: Outer cover, housing, base, rubber gasket, lock washer, positioning ring, mounting nut.
FAQ
Q: What benefits does the protective cover bring?
A: The sturdy protective cover can effectively block debris and falling parts on the production line, avoiding unexpected false triggering and improving the stability of long-time continuous operation.
Q: What advantage does finger shading operation have?
A: It adopts non-contact light trigger mode, operators only need simple finger shading to finish startup. No pressing force required, greatly reducing hand burden and preventing cumulative tendon injury during repetitive work.
Q: What is the advantage of M30 mounting design?
A: The standard M30 thread structure matches common industrial installation accessories. With lock washer, it achieves firm anti-slip fixation. Its symmetric body allows flexible direction adjustment during on-site assembly.
Hot Tags: sw-200 series optical start switch, China sw-200 series optical start switch manufacturers, factory, Panasonic CX 400 Ver 2 Compact Photoelectric Sensor, Panasonic FP0H RTEX Position Control Unit, Panasonic MSMF042L1U2M Servo Motor, Panasonic MSMF152L1G6M Servo Motor, Panasonic PM Series U shaped Photoelectric Sensor, panasonic sensor
