Product Introduction
Our Fan-type Static Eliminator ER-F Series is Suzhou-manufactured industrial ionizing fan with compact benchtop size, which will not hinder on-site operation. It features DSO / DSC LED status indication, two interchangeable louvers and high-voltage safety cut-off design for easy emitter needle maintenance.
Key Benefits
▶Compact benchtop design: W150mm×H166mm×D62mm compact size, occupies little workspace and does not block on-site work procedures.
▶Two replaceable louvers: Straight-air-supply louver for long-distance static elimination, wide-angle louver for large-area static removal.
▶Safe maintenance-friendly structure: High-voltage circuit cuts off when louver is removed, operator safety is guaranteed; emitter needle can be replaced without taking down the main unit.
Technical Specifications
|
Item |
Standard Fan Type ER-F12A |
Small Output Air Volume Fan Type ER-F12SA |
|
Static elimination time |
Approx.1 second |
Approx.15 seconds |
|
Ion balance |
±10V or less |
±10V or less |
|
Power supply voltage |
24V DC ±10% |
24V DC ±10% |
|
Discharge method |
High-frequency AC mode |
High-frequency AC mode |
|
Discharge output voltage |
Approx. ±2kV |
Approx. ±2kV |
|
Max wind speed |
5.3 m/s |
4.0 m/s |
|
Max air volume |
3.68 m³/min |
2.50 m³/min |
|
Operating ambient temperature |
0℃ ~ +50℃ |
0℃ ~ +50℃ |
|
Dimensions |
W150mm × H166mm × D62mm |
W150mm × H166mm × D62mm |
Applications & Components
▶Thin-film processing static removing: It adopts small-output-air-volume version to eliminate static for thin-film workpieces and avoid film fluttering caused by excessive wind force.
▶Small-part assembly static elimination: It works on benchtop assembly stations to remove static for tiny components and prevent static-caused adsorption issues.
▶Long-distance static neutralization: It installs straight-air-supply louver to realize static elimination for targets far away from the equipment.
Why Choose This Machine
Our Fan-type Static Eliminator ER-F Series provides stable static-neutralizing performance for bench-top production. Compact size and built-in high-voltage power-off protection enhance operation safety. Interchangeable louvers and two model versions satisfy varied production demands. LED indicators show real-time working status, and emitter needle replacement can be finished without special tools to cut maintenance cost.
Part of Your Smart Factory
Our Fan-type Static Eliminator ER-F Series is well-suited for benchtop stations of smart factories. It effectively eliminates static electricity to avoid material adhesion, dust-attracting and component damage. Its small footprint can be easily added to existing semi-automatic workstations. With visible LED alarm feedback, it helps build reliable anti-static conditions for your smart workshop.
FAQ
Q: What is the difference between ER-F12A and ER-F12SA?
A: ER-F12A is standard fan-type with high wind speed for fast static elimination. ER-F12SA is small-output-air-volume model, suitable for thin-film and light-weight workpieces to prevent fluttering.
Q: Do I need extra tools to replace the emitter needle?
A: No extra tools are required. Just remove the louver for convenient needle replacement, and high-voltage circuit will automatically cut off for safety.
Q: Can I swap two kinds of louvers on one unit?
A: Yes. Straight-air-supply louver and wide-angle louver are interchangeable on the same host to satisfy different static-elimination scenarios.
Hot Tags: Fan-type Static Eliminator ER-F Series, China Fan-type Static Eliminator ER-F Series manufacturers, factory, High Resolution Laser Positioning Transducer, Panasonic CX 400 Ver 2 Compact Photoelectric Sensor, Panasonic FP0H RTEX Position Control Unit, Panasonic MDDLN55SG Servo Drive, Panasonic MHMF012L1V2M Servo Motor, Panasonic NA2 N Series Slim Area Sensor
